FEATURES:

Right and left spindle rotation

Smooth speed control in 2 ranges

Left-hand threading capability

The ability to cut inch and metric threads

Cast iron bed hardened and ground

Quick fixation of the tailstock

Taper turning tailstock adjustment

Automatic feed when turning

Three automatic turning or tapping modes on one guitar tuning

High power engine

Adjusting the slides of the guides using wedge strips

The maximum processing diameter on the machine is 250 mm, the maximum distance between the centers is 550 mm, and the processing diameter above the slide is 150 mm, and for this, the machine is connected to a 220 V household network, which means the machine can be used at home, in a garage, in workshop and you do not need a 3-phase network. A powerful 1.1 kW motor will provide excellent machining on the machine and will rotate the spindle with Morse tapers MT4 in two ranges, with smooth adjustment, from 50 to 1250 rpm and from 100 to 2500 rpm.

The machine is capable of cutting both right-hand and left-hand threads. It cuts metric and inch threads. Replaceable metal gears are used for threading, they are included with the machine. A feed box is installed on the machine - this is another important feature of the machine. After you type the guitar you need from gears to a thread or automatic feed, you will have three speeds or three possible threads. For example, dialing an automatic feed of 0.1 mm per spindle revolution from one set of gears, you get three automatic feeds: 0.1 mm / revolution, 0.2 and 0.4 mm per spindle revolution. Thus, on the machine, having two sets of gears, we get six automatic feeds, and it is not necessary to sort them out each time, we just turn the knob on the machine panel. Isn't that convenient?

With all this, we still have the ability to change the direction of rotation of the spindle, both clockwise and counterclockwise. Possibility of grooving small tapers by rotating the carriage with low longitudinal feed. The tailstock can be adjusted 10 mm in both directions. The ability to adjust the wedge strips for transverse and low longitudinal feed, and much more.