| 机型 | Madel | CT6241 |
| 床身上**回转直径 | Max. swing over bed | 410mm (16") |
| 刀架回转直径 | Max. swing over cross slide | 255mm(10") |
| 马鞍槽内**回转直径 | Max. swing over gap | 540mm(21") |
| 中心高 | Center height | 205mm(8") |
| **工件长度 | Distance betveen centers | 1000mm |
| 床身宽度 | Width of bed | 250mm(10") |
| 刀杆尺寸 | Max. section of tool | 20x 20mm(3/4"x 3/4") |
| 中拖板**横向行程 | Max. travel of cross slide | 210mm(8 1/2") |
| 小拖板**纵向行程 | Max. travel of compound rese | 140mm(5 1/2") |
| 主轴通孔直径 | Spindle bore | 52mm |
| 主轴类型 | Spindle nose | D1-6 |
| 主轴内孔锥度 | Taper of spindle speed | M.T.#6 |
| 主轴转速范围 | Range of spindle speed | (16) 45~1800r/min |
| 丝杠直径和螺纹 | Leadscrew pitch | 4 T.P.I |
| 公制纵向进给范囤 | Range of metric longitudinal feeds range | 0.05~1.7mm/rev (17 Nos) |
| 英制纵向进给范围 | Range of inch longitudinal feeds | 0.002"~0.067"/rev (17. Nos) |
| 公制横向进给范围 | Range of metric cross feeds | 0.025-0.85mm/rev (17 Nos) |
| 英制横向进给范围 | Range of inch cross feeds | 0.001"~0.0335"/rev (17 Nos) |
| 公制螺纹范围 | Range of metric threads | 0. 2-14mm (NO. 39) |
| 英制螺纹范围 | Range of inch threads | 2-72 T.P.I. (NO. 45) |
| 径节螺纹范围/种数 | Range of Dianetrical pitch | 8-44 D.P. (21Nos) |
| 模数螺纹范围/种数 | Range of nodule pitches | 0.3-3.5 M.P. (18Nos) |
| 尾座套筒直径 | Dia. of tailstock sleeve | 50mm(2") |
| 尾架套筒行程 | Travel af tailstock sleeve | 120mm(4-3/4") |
| 尾架套简锥度 | Morse taper of tailstock sleeve | M.T.#4 |
| 主电机功率 | Power of main motor | 3.0/4. 5kw |
| 水泵功率 | Power af' coolant pump | 4P,3PH 90w |
| 外型尺寸《长*宽*高) | Overall diamension(L*W*H) | 1940 x 850 x 1320mm |
| 包装箱尺寸(长*宽*高) | Packing size(L*W*H) | 2030x820x1620mn |
| 净重/毛重 | N.W/G.W | 1550kg/1760kg |
